Table of contents
|
|
__Shotgun Tool, open |
Head
Shape of the hammer head on the Shotgun Tool resembles a small sledge hammer. It is highly polished, with the Beretta logo stamped deeply on one side. The head is integral with a solid shank, the sides of which have three hex wrench cutouts in it.Handles/Frame
Two opposing handles enclose the shank of the hammer head. When they are completely foded down, it gives the hammer a useful swing arc, unlike other hammer multitools on the market today.The handles themselves are double-folded sheets of steel, similar to the Leatherman Wave. Another reminder of Leatherman is the pivot screws, which are knurl drive like an original PST.
Blades and Tools
- small pliers, spring loaded
- square shank phillips screwdriver
- sheepsfoot knife blade, 1.60" long (41mm)
- special choke tube wrench tool for Beretta Optima, Mobil, and Victory shotguns
- standard 12-20 gauge choke tube wrench
- standard .410-28 gauge choke tube wrench
- combination large flathead screwdriver/file blade
- combination medium flathead screwdriver/cap lifter
Locking Mechanism
None of the blades lock open.Other Features
In the shank of the hammer head there are three hex head cutouts. These can be used to drive bolts with 1/4", 3/8", or 9/16" heads. (6mm, 10mm, 14mm)Included seperately with the Shotgun Tool is a standard 3/32" (2mm) drift pin punch, with octagon shank to prevent rolling off a table.
Sheath
Sheath is woven black nylon, with a velcro closure. Loops on the backside allow for vertical carry only. Elastic sleeves along each side carry the pin punch, pencils, etc.Dimensions
- Folded length = 4.95" (126mm)
- Unfolded length = 8.42" (214mm)
- Thickness = .90" (23mm)
- Weight = 12 oz (340g)
;){kind=link}